ECMTuning - Speed Density Ethanol Sensor Adapter (DSM / EVO 1-3) MSRP: Was: Now: $40.00 Choose Options
ECMTuning - Speed Density Bundle (GM-style MAP, IAT, pigtails and bung) MSRP: Was: Now: $115.00 Choose Options
ECMTuning - Speed Density Bundle (Mitsu-style MAP, IAT, Pigtails and Bung) MSRP: Was: Now: $125.00 Choose Options
AEM Stainless Steel MAP/Pressure Sensor Kits (PSIA/PSIG) MSRP: Was: Now: $159.95 - $174.95 Choose Options
Haltech Elite 1500 Premium Universal Wire-in Harness (DSM/Evo) MSRP: $512.00 Was: Now: $400.00 Choose Options
Haltech Elite 1000/1500 Mitsubishi Plug 'n' Play Adaptor Harness (DSM/Evo) MSRP: $549.00 Was: Now: $440.00 Choose Options
ECMTuning - Speed Density Ethanol Sensor Adapter (DSM / EVO 1-3) This harness adapter has a connector for a standard GM-style ethanol sensor on one end and loose terminals on the other end that plug into our SD cable's MAF connector. Specify whether you have a 1G DSM, 2G DSM or EVO1-3 MAF connector end on your SD... MSRP: Was: Now: $40.00 Choose Options
ECMTuning - USB Datalogging Cables (ECMLink V3 Only) Please do NOT order this cable unless you KNOW what you're doing. You can not reprogram your factory EPROM chip with this cable. You can not use this cable with a variety of other software packages. And you can not use this cable to replace your lost... MSRP: Was: Now: $75.00 Choose Options
ECMTuning - Speed Density Bundle (GM-style MAP, IAT, pigtails and bung) The complete set up for running speed density with ECMLink. A reliable 4-bar MAP sensor and a GM IAT sensor complete with pigtails and bung.If you're looking for true "plug-n-play" then be sure to check out ECMLink's direct-connect SD cable. This SD... MSRP: Was: Now: $115.00 Choose Options
ECMTuning - 2G DSM MDP This adapter bolts into place of the factory MDP sensor on top of the stock 2G intake manifold. You can either screw in the included 1/4" x 1/8" NPT hose barb fitting and run a short vacuum hose to your boost sensor or directly connect an AEM boost... MSRP: Was: Now: $20.00 Add to Cart
ECMTuning - Speed Density Cable (DSM / EVO 1-3) This cable allows the user to install a GM or AEM IAT sensor and any GM-style MAP sensor (including ECMLink's 4-bar GM-style sensor) without the hassle of cutting wires on the factory wiring harness. Just plug this harness in to your stock MAS connector... MSRP: Was: Now: $65.00 Choose Options
Haltech Nexus R5 VCU Outputs: Up to 18 injector and 12 ignition Suits: Engines with up to 12 cylinders or up to 6 rotors. Racing applications where advanced race features, data logging and power management control is required. Includes: Nexus R5 VCU, SurLok... MSRP: Was: Now: $4,300.00 Choose Options
ECMTuning - Speed Density Bundle (Mitsu-style MAP, IAT, Pigtails and Bung) The complete set up for running speed density with ECMLink. This kit includes a reliable 4-bar MAP sensor with a Mitsubishi MDP-style connector end and a GM IAT sensor with IAT pigtail and bung.Note that the MAP sensor included in this kit is intended... MSRP: Was: Now: $125.00 Choose Options
Hallman Pro RX Manual Boost Controller This Hallman Pro RX MBC kit was specifically designed for those that only wish to add a few pounds of boost over stock and have a great amount of control over those few pounds. The kit includes a ceramic ball instead of the 316 stainless ball that comes... MSRP: Was: Now: $130.50 Choose Options
AEM Boost Control Solenoid AEM Boost Control Solenoids are pressure-tested to an amazing 100 psi and will not leak. AEM Electronics boost control solenoid kits include -4 AN fittings so that you can securely attach wastegate lines without worrying about leaking at the connection... MSRP: $111.88 Was: Now: $109.95 Add to Cart
ECMTuning - 1G into a 2g CAM Angle Sensor ECMTuning's 1G-in-a-2G CAM angle sensor adapter harness allows for the installation of a 1G style Cam Angle Sensor into a 2g car without a fuss! One end plugs directly into the 1G CAM/Crank combination sensor and the other end plugs directly into the... MSRP: Was: Now: $75.00 Choose Options
AEM Stainless Steel MAP/Pressure Sensor Kits (PSIA/PSIG) AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous... MSRP: Was: Now: $159.95 - $174.95 Choose Options
AEM Ethanol Content Flex Fuel Sensor Kit AEM offers two Fuel Ethanol Content (Flex Fuel) Sensor Kits, one with 3/8” barbed adapter fittings and one with -6AN to 3/8” adapter fittings.AEM’s Flex Fuel Ethanol Content Sensor Kits measure a vehicle’s fuel ethanol content percentage and fuel... MSRP: Was: Now: $197.63 - $222.73 Choose Options
Bosch 145 PSI Fluid Pressure & Temperature Sensor Bosch 145 PSI Fluid Pressure and Temperature Sensor Thread: M10 x 1.0 Includes: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. Notes: Used to measure fluid pressure and temperature Pressure Range 0-145 PSI Temperature Range -40... MSRP: Was: Now: $155.00 Add to Cart
Haltech 150psi "TI' Fuel / Oil / Wastegate Pressure Sensor 150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT Includes: Matching Delphi plug and 3 pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted... MSRP: Was: Now: $199.00 Add to Cart
Haltech Triple Switch Panel Kit Triple Switch Panel Only - includes Yellow & Red knobs 12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) #HT-010510 MSRP: Was: Now: $295.00 Add to Cart
Haltech WB1 Single Channel CAN O2 Wideband Controller Kit Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. Notes: The ideal CAN expansion accessory for all Elite Series ECUs... MSRP: Was: Now: $349.00 Add to Cart
Haltech 8 Button (2x4) CAN Keypad Suits: NEXUS and Elite devices only Includes: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut and Washer Kit Notes: Not compatible with Platinum or earlier... MSRP: Was: Now: $349.00 Add to Cart
Haltech Elite 1500 Premium Universal Wire-in Harness (DSM/Evo) Elite 1500 Premium Universal Wire-in HarnessLENGTH: 2.5m (8')Part Number: HT-140904INCLUDES: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits.HARNESS OVERVIEW:Ideal for... MSRP: $512.00 Was: Now: $400.00 Choose Options
FuelTech Boost Controller - 16x2 characters OLED display and buttons that allow programming directly on the unit. No computer needed- Active boost control through wastegate pressure management- Up to 6 stages of Boost and 1 launch stage- For drag racing, circuit and street cars-... MSRP: Was: Now: $719.00 Add to Cart
AEM Wideband/O2 Replacement Sensor AEM Bosch Wideband/O2 Replacement Sensor.Old Style # 30-2001 New Style #30-2004 Prop 65: for California residents only(1) Do Not cover, obscure or alter a Prop 65 warning label that AEM Electronics intends to affix to its products, labels, or... MSRP: $101.45 Was: Now: $94.07 - $121.40 Choose Options
OEM Mitsubishi Rear Oxygen/O2 Sensor(2G DSM) OEM Mitsubishi Rear Oxygen (02) Sensor for the 2G DSM. MSRP: Was: Now: $200.68 Add to Cart
Haltech Elite 1000/1500 Mitsubishi Plug 'n' Play Adaptor Harness (DSM/Evo) If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the... MSRP: $549.00 Was: Now: $440.00 Choose Options
Kenne Bell Dual Boost-A-Pump (DSM / Evo 8/9/X / R35 GT-R) BOOST-A-PUMP® FEATURES• Easily Installed. Simple “Single Wire” connection or Plug N Play (Fords only)• Fused circuit protection (40 amps).• Ideal for Nitrous applications.• Attractive anodized red aluminum.• 1000HP with OEM in tank production pumps.•... MSRP: Was: Now: $522.00 Add to Cart
Haltech Wideband O2 Sensor - Bosch LSU 4.2 (DSM/Evo) Haltech Wideband O2 Sensor Only - Bosch LSU 4.2#HT-010714INCLUDES: Pre-terminated with female Deutsch DT-6 connector. MSRP: Was: Now: $145.00 Add to Cart
