ECMTuning - Speed Density Ethanol Sensor Adapter (DSM / EVO 1-3) MSRP: Was: Now: $40.00 Choose Options
ECMTuning - Speed Density Bundle (GM-style MAP, IAT, pigtails and bung) MSRP: Was: Now: $115.00 Choose Options
ECMTuning - Speed Density Bundle (Mitsu-style MAP, IAT, Pigtails and Bung) MSRP: Was: Now: $125.00 Choose Options
AEM Stainless Steel MAP/Pressure Sensor Kits (PSIA/PSIG) MSRP: Was: Now: $159.95 - $174.95 Choose Options
Haltech Elite 1500 Premium Universal Wire-in Harness (DSM/Evo) MSRP: $512.00 Was: Now: $400.00 Choose Options
AEM UEGO X-Series Wideband AEM’s X-Series Wideband UEGO Air/Fuel Ratio Sensor Controller Gauges are built upon unique, patent-pending X-Digital technology that makes them the fastest responding wideband air/fuel ratio controllers in independent testing against 17 other wideband... MSRP: Was: Now: $189.94 Add to Cart
ECMTuning - Speed Density Ethanol Sensor Adapter (DSM / EVO 1-3) This harness adapter has a connector for a standard GM-style ethanol sensor on one end and loose terminals on the other end that plug into our SD cable's MAF connector. Specify whether you have a 1G DSM, 2G DSM or EVO1-3 MAF connector end on your SD... MSRP: Was: Now: $40.00 Choose Options
ECMTuning - USB Datalogging Cables (ECMLink V3 Only) Please do NOT order this cable unless you KNOW what you're doing. You can not reprogram your factory EPROM chip with this cable. You can not use this cable with a variety of other software packages. And you can not use this cable to replace your lost... MSRP: Was: Now: $75.00 Choose Options
ECMTuning - Speed Density Bundle (GM-style MAP, IAT, pigtails and bung) The complete set up for running speed density with ECMLink. A reliable 4-bar MAP sensor and a GM IAT sensor complete with pigtails and bung.If you're looking for true "plug-n-play" then be sure to check out ECMLink's direct-connect SD cable. This SD... MSRP: Was: Now: $115.00 Choose Options
ECMTuning - 2G DSM MDP This adapter bolts into place of the factory MDP sensor on top of the stock 2G intake manifold. You can either screw in the included 1/4" x 1/8" NPT hose barb fitting and run a short vacuum hose to your boost sensor or directly connect an AEM boost... MSRP: Was: Now: $20.00 Add to Cart
ECMTuning - Speed Density Cable (DSM / EVO 1-3) This cable allows the user to install a GM or AEM IAT sensor and any GM-style MAP sensor (including ECMLink's 4-bar GM-style sensor) without the hassle of cutting wires on the factory wiring harness. Just plug this harness in to your stock MAS connector... MSRP: Was: Now: $65.00 Choose Options
Haltech Oil Temperature Sensor High Range Thread: 1/8 NPT 27TPI Haltech Oil Temperature sensor High Range 150°C #HT-010306 MSRP: Was: Now: $85.00 Add to Cart
Haltech Nexus R5 VCU Outputs: Up to 18 injector and 12 ignition Suits: Engines with up to 12 cylinders or up to 6 rotors. Racing applications where advanced race features, data logging and power management control is required. Includes: Nexus R5 VCU, SurLok... MSRP: Was: Now: $4,300.00 Choose Options
Sensor - Crankshaft Trigger Wheel/Blade (2G DSM - EVO 8/9) Mitsubishi OEM Crank Trigger Wheel/Blade for 7-bolt 2G DSM or EVO 8/9 MSRP: Was: Now: $21.75 Add to Cart
ECMTuning - Speed Density Bundle (Mitsu-style MAP, IAT, Pigtails and Bung) The complete set up for running speed density with ECMLink. This kit includes a reliable 4-bar MAP sensor with a Mitsubishi MDP-style connector end and a GM IAT sensor with IAT pigtail and bung.Note that the MAP sensor included in this kit is intended... MSRP: Was: Now: $125.00 Choose Options
AEM X-Series GPS Speedo Gauge 0-160 MPH Display ground speed, course and altitude via an included 10Hz GPS receiver. Integrates with Infinity ECU, Series 2 EMS or EMS-4 to add track mapping, and an included Vehicle Speed signal can be outputted to an existing speedometer to eliminate the need... MSRP: Was: Now: $171.35 Add to Cart
ECMTuning - 1G into a 2g CAM Angle Sensor ECMTuning's 1G-in-a-2G CAM angle sensor adapter harness allows for the installation of a 1G style Cam Angle Sensor into a 2g car without a fuss! One end plugs directly into the 1G CAM/Crank combination sensor and the other end plugs directly into the... MSRP: Was: Now: $75.00 Choose Options
AEM Stainless Steel MAP/Pressure Sensor Kits (PSIA/PSIG) AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous... MSRP: Was: Now: $159.95 - $174.95 Choose Options
AEM Ethanol Content Flex Fuel Sensor Kit AEM offers two Fuel Ethanol Content (Flex Fuel) Sensor Kits, one with 3/8” barbed adapter fittings and one with -6AN to 3/8” adapter fittings.AEM’s Flex Fuel Ethanol Content Sensor Kits measure a vehicle’s fuel ethanol content percentage and fuel... MSRP: Was: Now: $197.63 - $222.73 Choose Options
Bosch 145 PSI Fluid Pressure & Temperature Sensor Bosch 145 PSI Fluid Pressure and Temperature Sensor Thread: M10 x 1.0 Includes: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. Notes: Used to measure fluid pressure and temperature Pressure Range 0-145 PSI Temperature Range -40... MSRP: Was: Now: $155.00 Add to Cart
Haltech 150psi "TI' Fuel / Oil / Wastegate Pressure Sensor 150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT Includes: Matching Delphi plug and 3 pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted... MSRP: Was: Now: $199.00 Add to Cart
Haltech Wideband Sensor - Bosch LSU 4.9 Wideband Sensor only - Bosch LSU 4.9 with Factory Connector HT-010718 MSRP: Was: Now: $118.00 Add to Cart
Haltech Triple Switch Panel Kit Triple Switch Panel Only - includes Yellow & Red knobs 12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) #HT-010510 MSRP: Was: Now: $295.00 Add to Cart
AEM Replacement Brass Sensor Kits Brass Gauge style (PSIg) Pressure SensorsAEM offers brass PSIg sensors in 15, 100 and 150. Gauge style pressure sensors reference pressure above atmospheric pressure. When exposed to atmospheric pressure, gauge style pressure sensors will read 0 psig... MSRP: Was: Now: $66.10 - $66.75 Choose Options
Haltech WB1 Single Channel CAN O2 Wideband Controller Kit Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. Notes: The ideal CAN expansion accessory for all Elite Series ECUs... MSRP: Was: Now: $349.00 Add to Cart
Haltech 8 Button (2x4) CAN Keypad Suits: NEXUS and Elite devices only Includes: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut and Washer Kit Notes: Not compatible with Platinum or earlier... MSRP: Was: Now: $349.00 Add to Cart
AEM Digital Trans Oil Water Temperature Gauge AEM’s Digital Coolant Temperature Gauge unites unsurpassed accuracy, speed and control with an easy to read, digital LED interface. AEM digital gauges also offer a 0-5v analog output for use with data loggers and virtually any engine management system,... MSRP: Was: Now: $182.85 Add to Cart
AEM Digital 8-18V Voltmeter Gauge AEM’s Digital Voltage Gauge unites unsurpassed accuracy, speed and control with an easy to read, digital LED interface. AEM digital gauges also offer a 0-5v analog output for use with data loggers and virtually any engine management system, such as the... MSRP: Was: Now: $124.88 Add to Cart
Haltech Elite 1500 Premium Universal Wire-in Harness (DSM/Evo) Elite 1500 Premium Universal Wire-in HarnessLENGTH: 2.5m (8')Part Number: HT-140904INCLUDES: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits.HARNESS OVERVIEW:Ideal for... MSRP: $512.00 Was: Now: $400.00 Choose Options