ECMTuning - Speed Density Ethanol Sensor Adapter (DSM / EVO 1-3) MSRP: Was: Now: $40.00 Choose Options
ECMTuning - Speed Density Bundle (GM-style MAP, IAT, pigtails and bung) MSRP: Was: Now: $115.00 Choose Options
ECMTuning - Speed Density Bundle (Mitsu-style MAP, IAT, Pigtails and Bung) MSRP: Was: Now: $125.00 Choose Options
AEM X-Series 0-160 MPH Black Bezel w/ Black Face GPS Speedo (Universal) MSRP: Was: Now: $180.95 Add to Cart
AEM Stainless Steel MAP/Pressure Sensor Kits (PSIA/PSIG) MSRP: Was: Now: $163.95 - $206.95 Choose Options
ECMTuning - Speed Density Cable (DSM / EVO 1-3) This cable allows the user to install a GM or AEM IAT sensor and any GM-style MAP sensor (including ECMLink's 4-bar GM-style sensor) without the hassle of cutting wires on the factory wiring harness. Just plug this harness in to your stock MAS connector... MSRP: Was: Now: $65.00 Choose Options
ECMTuning - 2G DSM MDP This adapter bolts into place of the factory MDP sensor on top of the stock 2G intake manifold. You can either screw in the included 1/4" x 1/8" NPT hose barb fitting and run a short vacuum hose to your boost sensor or directly connect an AEM boost... MSRP: Was: Now: $20.00 Add to Cart
Haltech Wideband Sensor - Bosch LSU 4.9 Wideband Sensor only - Bosch LSU 4.9 with Factory Connector HT-010718 MSRP: Was: Now: $130.00 Add to Cart
ECMTuning - Speed Density Ethanol Sensor Adapter (DSM / EVO 1-3) This harness adapter has a connector for a standard GM-style ethanol sensor on one end and loose terminals on the other end that plug into our SD cable's MAF connector. Specify whether you have a 1G DSM, 2G DSM or EVO1-3 MAF connector end on your SD... MSRP: Was: Now: $40.00 Choose Options
AEM Bosch UEGO Replacement 02 Sensors (Universal) AEM Bosch Wideband/O2 Replacement Sensor.Old Design # 30-2001 New Design #30-2004 Prop 65: for California residents only(1) Do Not cover, obscure or alter a Prop 65 warning label that AEM Electronics intends to affix to its products, labels, or... MSRP: Was: Now: $102.95 - $135.35 Choose Options
ECMTuning - USB Datalogging Cables (ECMLink V3 Only) Please do NOT order this cable unless you KNOW what you're doing. You can not reprogram your factory EPROM chip with this cable. You can not use this cable with a variety of other software packages. And you can not use this cable to replace your lost... MSRP: Was: Now: $75.00 Choose Options
Haltech Nexus R5 VCU Outputs: Up to 18 injector and 12 ignition Suits: Engines with up to 12 cylinders or up to 6 rotors. Racing applications where advanced race features, data logging and power management control is required. Includes: Nexus R5 VCU, SurLok... MSRP: Was: Now: $4,299.00 Choose Options
OEM Mitsubishi Cam Gear Bolt (DSM/Evo 8/9) OEM Mitsubishi Cam Gear Bolt for the 4G63 DSM & Evo 8/9Requires (2) for a full set. Sold Individually, as needed.#MF140285 MSRP: Was: Now: $2.25 Add to Cart
AEM UEGO X-Series Wideband AEM’s X-Series Wideband UEGO Air/Fuel Ratio Sensor Controller Gauges are built upon unique, patent-pending X-Digital technology that makes them the fastest responding wideband air/fuel ratio controllers in independent testing against 17 other wideband... MSRP: Was: Now: $199.95 Add to Cart
ECMTuning - Speed Density Bundle (GM-style MAP, IAT, pigtails and bung) The complete set up for running speed density with ECMLink. A reliable 4-bar MAP sensor and a GM IAT sensor complete with pigtails and bung.If you're looking for true "plug-n-play" then be sure to check out ECMLink's direct-connect SD cable. This SD... MSRP: Was: Now: $115.00 Choose Options
Sensor - Crankshaft Trigger Wheel/Blade (2G DSM - EVO 8/9) Mitsubishi OEM Crank Trigger Wheel/Blade for 7-bolt 2G DSM or EVO 8/9 MSRP: Was: Now: $21.75 Add to Cart
ECMTuning - 1G into a 2g CAM Angle Sensor ECMTuning's 1G-in-a-2G CAM angle sensor adapter harness allows for the installation of a 1G style Cam Angle Sensor into a 2g car without a fuss! One end plugs directly into the 1G CAM/Crank combination sensor and the other end plugs directly into the... MSRP: Was: Now: $75.00 Choose Options
AEM Ethanol Content Flex Fuel Sensor Kit AEM offers two Fuel Ethanol Content (Flex Fuel) Sensor Kits, one with 3/8” barbed adapter fittings and one with -6AN to 3/8” adapter fittings.AEM’s Flex Fuel Ethanol Content Sensor Kits measure a vehicle’s fuel ethanol content percentage and fuel... MSRP: Was: Now: $267.95 - $301.95 Choose Options
Haltech Oil Temperature Sensor High Range Thread: 1/8 NPT 27TPI Haltech Oil Temperature sensor High Range 150°C #HT-010306 MSRP: Was: Now: $85.00 Add to Cart
ECMTuning - Speed Density Bundle (Mitsu-style MAP, IAT, Pigtails and Bung) The complete set up for running speed density with ECMLink. This kit includes a reliable 4-bar MAP sensor with a Mitsubishi MDP-style connector end and a GM IAT sensor with IAT pigtail and bung.Note that the MAP sensor included in this kit is intended... MSRP: Was: Now: $125.00 Choose Options
AEM X-Series 0-160 MPH Black Bezel w/ Black Face GPS Speedo (Universal) Display ground speed, course and altitude via an included 10Hz GPS receiver. Integrates with Infinity ECU, Series 2 EMS or EMS-4 to add track mapping, and an included Vehicle Speed signal can be outputted to an existing speedometer to eliminate the need... MSRP: Was: Now: $180.95 Add to Cart
AEM Stainless Steel MAP/Pressure Sensor Kits (PSIA/PSIG) AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous... MSRP: Was: Now: $163.95 - $206.95 Choose Options
AEM 52mm Digital Boost Gauge -30-35psi (Universal) AEM’s digital display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an... MSRP: Was: Now: $179.95 Add to Cart
AEM X-Series Boost Pressure -30inHg 60psi Gauge Kit (Universal) AEM’s new X-Series Digital Gauges combine incredible looks, increased readability and a multitude of new, easy-to-use features! X-Series Digital Display Gauges are available for Boost, EGT, Fuel/Oil Pressure, Oil/Water/Trans Temperature and Volts... MSRP: Was: Now: $315.95 Add to Cart
Haltech 5 Bar "TI' MAP Sensor Haltech 5 Bar "TI" MAP Sensor Thread: 1/8 NPT HT-010110 Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electronically tested before... MSRP: Was: Now: $239.00 Add to Cart
Haltech 3-Port Boost Control Solenoid 33Hz Haltech Boost Control Solenoid 3-Port 33Hz Thread: 1/8 NPT HT-020400 MSRP: Was: Now: $125.00 Add to Cart
Bosch 145 PSI Fluid Pressure & Temperature Sensor Bosch 145 PSI Fluid Pressure and Temperature Sensor Thread: M10 x 1.0 Includes: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. Notes: Used to measure fluid pressure and temperature Pressure Range 0-145 PSI Temperature Range -40... MSRP: Was: Now: $155.00 Add to Cart
Haltech 150psi "TI' Fuel / Oil / Wastegate Pressure Sensor 150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT Includes: Matching Delphi plug and 3 pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted... MSRP: Was: Now: $199.00 Add to Cart
Haltech Triple Switch Panel Kit Triple Switch Panel Only - includes Yellow & Red knobs 12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) #HT-010510 MSRP: Was: Now: $295.00 Add to Cart
