EVO IX JB Black
New for 2020! All FP Black model turbos will come standard with a black coated compressor cover!
Compressor wheel - 82HTZ
Flow rating - 71LB per minute
CW Measurements - 59.1MM Inducer / 82MM Exducer
TW Measurements - 67.3MM Inducer / 58.8MM Exducer
Compressor Housing - 84MM Flow Advancement Port Cover
Turbine Housing - FP Stainless or MHI Stock Configuration
CHRA - FP Journal Bearing
Oil Line - Not Included - Required for proper lubrication.
The FP Black has long been the benchmark in the stock appearing EVO IX market propelling the platform into the low 9's and into and beyond the 600WHP territory all while passing itself off as a stock turbo. It's a potent combination of a 67MM turbine wheel mated with an 82HTZ compressor wheel for a flow rating of 71LB per minute and a ton of fun in your EVO.
All EVO 9 turbos will now come standard with our new cast stainless turbine housing. This turbine housing has been designed to maximize flow while not sacrificing spool characteristics. It has a 3" outlet and has a TiAL MV-S waste gate flange machined directly onto the housing.
The FP EVO Stainless Turbine Housing was designed for race applications where the turbocharger would be operating above 20psi. Attempting to operate below 20PSI can result in boost creep in some applications.
Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.
New for 2020! All FP Black model turbos will come standard with a black coated compressor cover!
Compressor wheel - 82HTZ
Flow rating - 71LB per minute
CW Measurements - 59.1MM Inducer / 82MM Exducer
TW Measurements - 67.3MM Inducer / 58.8MM Exducer
Compressor Housing - 84MM Flow Advancement Port Cover
Turbine Housing - FP Stainless or MHI Stock Configuration
CHRA - FP Journal Bearing
Oil Line - Not Included - Required for proper lubrication.
The FP Black has long been the benchmark in the stock appearing EVO IX market propelling the platform into the low 9's and into and beyond the 600WHP territory all while passing itself off as a stock turbo. It's a potent combination of a 67MM turbine wheel mated with an 82HTZ compressor wheel for a flow rating of 71LB per minute and a ton of fun in your EVO.
All EVO 9 turbos will now come standard with our new cast stainless turbine housing. This turbine housing has been designed to maximize flow while not sacrificing spool characteristics. It has a 3" outlet and has a TiAL MV-S waste gate flange machined directly onto the housing.
The FP EVO Stainless Turbine Housing was designed for race applications where the turbocharger would be operating above 20psi. Attempting to operate below 20PSI can result in boost creep in some applications.
Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.
