EVO IX BB Black
New for 2020! All FP Black model turbos will come standard with a black coated compressor cover!
Compressor wheel - 82HTZ
Flow rating - 71LB per minute
CW Measurements - 59.1MM Inducer / 82MM Exducer
TW Measurements - 67.3MM Inducer / 58.8MM Exducer
Compressor Housing - 84MM Flow Advancement Port Cover
Turbine Housing - FP Stainless or MHI Stock Configuration
CHRA - Xona Rotor Dual Ceramic Ball Bearing
Oil Line - Stock Oil Feed Line Compatible
The FP Black has long been the performance benchmark in the stock appearing EVO IX market. It has propelled the platform into the low 9’s and beyond the 600WHP mark. It’s a potent combination of a 67MM turbine wheel mated to our 82HTZ compressor wheel for a flow rating of 71LB a minute. In addition to the things you know and love about the journal bearing Black, this unit utilizes FP's Xona Ball Bearing CHRA for increased durability in situations where you might see low oil flow such as road racing or autocross applications.
All EVO 9 turbos will now come standard with FP's new cast stainless turbine housing. This turbine housing has been designed to maximize flow while not sacrificing spool characteristics. It has a 3" outlet and has a TiAL MV-S waste gate flange machined directly onto the housing.
The FP EVO Stainless Turbine Housing was designed for race applications where the turbocharger would be operating above 20psi. Attempting to operate below 20PSI can result in boost creep in some applications.
Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.
New for 2020! All FP Black model turbos will come standard with a black coated compressor cover!
Compressor wheel - 82HTZ
Flow rating - 71LB per minute
CW Measurements - 59.1MM Inducer / 82MM Exducer
TW Measurements - 67.3MM Inducer / 58.8MM Exducer
Compressor Housing - 84MM Flow Advancement Port Cover
Turbine Housing - FP Stainless or MHI Stock Configuration
CHRA - Xona Rotor Dual Ceramic Ball Bearing
Oil Line - Stock Oil Feed Line Compatible
The FP Black has long been the performance benchmark in the stock appearing EVO IX market. It has propelled the platform into the low 9’s and beyond the 600WHP mark. It’s a potent combination of a 67MM turbine wheel mated to our 82HTZ compressor wheel for a flow rating of 71LB a minute. In addition to the things you know and love about the journal bearing Black, this unit utilizes FP's Xona Ball Bearing CHRA for increased durability in situations where you might see low oil flow such as road racing or autocross applications.
All EVO 9 turbos will now come standard with FP's new cast stainless turbine housing. This turbine housing has been designed to maximize flow while not sacrificing spool characteristics. It has a 3" outlet and has a TiAL MV-S waste gate flange machined directly onto the housing.
The FP EVO Stainless Turbine Housing was designed for race applications where the turbocharger would be operating above 20psi. Attempting to operate below 20PSI can result in boost creep in some applications.
Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.
