Fuel Injector Clinic's 2150cc injectors are the largest high impedance injectors available on the market, featuring state of the art Data Match Technology. Each injector is individually serial numbered and the results are included with each injector set, providing the most complete flow matching and latency value information available in the industry today. This technology significantly improves the ECUÂ’'s ability to control the injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.
This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adapters which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.
**CAUTION! DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS** The internal construction of this 2150cc injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)
Sold in set of 4 injectors. Resistor pack removal recommended.
Includes 12 month manufacturer warranty against failure caused by defects.
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adapters which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.
**CAUTION! DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS** The internal construction of this 2150cc injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)
Sold in set of 4 injectors. Resistor pack removal recommended.
Includes 12 month manufacturer warranty against failure caused by defects.
