Fathouse Fabrication Battery Relocation Bracket - BRACKET ONLY (Evo 8/9) MSRP: Was: Now: $125.00 Choose Options
AEM X-Series 0-160 MPH Black Bezel w/ Black Face GPS Speedo (Universal) MSRP: Was: Now: $180.95 Add to Cart
AEM Stainless Steel MAP/Pressure Sensor Kits (PSIA/PSIG) MSRP: Was: Now: $163.95 - $206.95 Choose Options
Fathouse Fabrication Battery Relocation Kit (EVO 8/9) The Fathouse Fabrication Battery Relocation Bracket kit provides a clean way to hook up the wiring for your battery relocation under the hood using a custom mount and the factory EVO X fusable link parts.Fathouse Fabricaton Evo 8/9 Battery Relocation... MSRP: Was: Now: $219.99 Choose Options
Fathouse Fabrication Battery Relocation Bracket - BRACKET ONLY (Evo 8/9) This is for the bracket & hardware ONLY. All brackets are powder coated black with a light texture. *If you wish to purchase the full kit including fusable link, cover and mount, you can do so HERE MSRP: Was: Now: $125.00 Choose Options
Haltech Wideband Sensor - Bosch LSU 4.9 Wideband Sensor only - Bosch LSU 4.9 with Factory Connector HT-010718 MSRP: Was: Now: $130.00 Add to Cart
AEM Bosch UEGO Replacement 02 Sensors (Universal) AEM Bosch Wideband/O2 Replacement Sensor.Old Design # 30-2001 New Design #30-2004 Prop 65: for California residents only(1) Do Not cover, obscure or alter a Prop 65 warning label that AEM Electronics intends to affix to its products, labels, or... MSRP: Was: Now: $102.95 - $135.35 Choose Options
AEM UEGO X-Series Wideband AEM’s X-Series Wideband UEGO Air/Fuel Ratio Sensor Controller Gauges are built upon unique, patent-pending X-Digital technology that makes them the fastest responding wideband air/fuel ratio controllers in independent testing against 17 other wideband... MSRP: Was: Now: $199.95 Add to Cart
ETS Small Battery Kit (EVO 8/9) Save/cut weight and open up your Evo 8 and 9 engine bay. The ETS Mitsubishi Evolution IX and VIII Small Battery Kit was designed to work with any upper intercooler pipe configuration as well as the stock airbox using factory mounting points and hardware... MSRP: Was: Now: $340.00 Choose Options
Sensor - Crankshaft Trigger Wheel/Blade (2G DSM - EVO 8/9) Mitsubishi OEM Crank Trigger Wheel/Blade for 7-bolt 2G DSM or EVO 8/9 MSRP: Was: Now: $21.75 Add to Cart
OEM Mitsubishi Battery Terminal (Evo 8/9) Genuine Mitsubishi factory replacement battery terminal for the Evo 8/9#MU800890 MSRP: Was: Now: $21.65 Add to Cart
AEM Ethanol Content Flex Fuel Sensor Kit AEM offers two Fuel Ethanol Content (Flex Fuel) Sensor Kits, one with 3/8” barbed adapter fittings and one with -6AN to 3/8” adapter fittings.AEM’s Flex Fuel Ethanol Content Sensor Kits measure a vehicle’s fuel ethanol content percentage and fuel... MSRP: Was: Now: $267.95 - $301.95 Choose Options
Haltech Oil Temperature Sensor High Range Thread: 1/8 NPT 27TPI Haltech Oil Temperature sensor High Range 150°C #HT-010306 MSRP: Was: Now: $85.00 Add to Cart
AEM X-Series 0-160 MPH Black Bezel w/ Black Face GPS Speedo (Universal) Display ground speed, course and altitude via an included 10Hz GPS receiver. Integrates with Infinity ECU, Series 2 EMS or EMS-4 to add track mapping, and an included Vehicle Speed signal can be outputted to an existing speedometer to eliminate the need... MSRP: Was: Now: $180.95 Add to Cart
OEM Mitsubishi Crank Trigger Sensor (Evo 8/9) Mitsubishi MN158261 Genuine OEM Mitsubishi EVO 8/9 Crank Trigger Sensor MSRP: Was: Now: $137.33 Add to Cart
AEM Stainless Steel MAP/Pressure Sensor Kits (PSIA/PSIG) AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous... MSRP: Was: Now: $163.95 - $206.95 Choose Options
AEM 52mm Digital Boost Gauge -30-35psi (Universal) AEM’s digital display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an... MSRP: Was: Now: $179.95 Add to Cart
AEM X-Series Boost Pressure -30inHg 60psi Gauge Kit (Universal) AEM’s new X-Series Digital Gauges combine incredible looks, increased readability and a multitude of new, easy-to-use features! X-Series Digital Display Gauges are available for Boost, EGT, Fuel/Oil Pressure, Oil/Water/Trans Temperature and Volts... MSRP: Was: Now: $315.95 Add to Cart
Autometer 3 Gauge Lower Console Pod -52mm (Evo 8/9) Autometer 3 Gauge Lower Console Pod -52mm (Evo 8/9) MSRP: Was: Now: $88.47 Add to Cart
Haltech 5 Bar "TI' MAP Sensor Haltech 5 Bar "TI" MAP Sensor Thread: 1/8 NPT HT-010110 Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electronically tested before... MSRP: Was: Now: $239.00 Add to Cart
Haltech 3-Port Boost Control Solenoid 33Hz Haltech Boost Control Solenoid 3-Port 33Hz Thread: 1/8 NPT HT-020400 MSRP: Was: Now: $125.00 Add to Cart
Bosch 145 PSI Fluid Pressure & Temperature Sensor Bosch 145 PSI Fluid Pressure and Temperature Sensor Thread: M10 x 1.0 Includes: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. Notes: Used to measure fluid pressure and temperature Pressure Range 0-145 PSI Temperature Range -40... MSRP: Was: Now: $155.00 Add to Cart
Haltech 150psi "TI' Fuel / Oil / Wastegate Pressure Sensor 150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT Includes: Matching Delphi plug and 3 pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted... MSRP: Was: Now: $199.00 Add to Cart
Haltech Triple Switch Panel Kit Triple Switch Panel Only - includes Yellow & Red knobs 12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) #HT-010510 MSRP: Was: Now: $295.00 Add to Cart
AEM Replacement Brass Sensor Kits Brass Gauge style (PSIg) Pressure SensorsAEM offers brass PSIg sensors in 100 and 150. Gauge style pressure sensors reference pressure above atmospheric pressure. When exposed to atmospheric pressure, gauge style pressure sensors will read 0 psig. Gauge... MSRP: Was: Now: $71.69 - $84.65 Choose Options
Haltech WB1 Single Channel CAN O2 Wideband Controller Kit Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. Notes: The ideal CAN expansion accessory for all Elite Series ECUs... MSRP: Was: Now: $349.00 Add to Cart
Haltech 8 Button (2x4) CAN Keypad Suits: NEXUS and Elite devices only Includes: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut and Washer Kit Notes: Not compatible with Platinum or earlier... MSRP: Was: Now: $352.00 Add to Cart
