Exhaust Manifold - Forced Performance Exhaust Manifold Stud and Nut Kit (DSM/Evo 8/9) MSRP: Was: Now: $30.00 Choose Options
Clutch - Quarter Master Hydraulic Throwout Bearing (Evo 8/9/X) The Quarter Hydraulic Release Bearing provides a solid pedal feel and consistent pedal actuation in street or race applications.For use with the 5-Speed Evo 8, 9, & X applications MSRP: Was: Now: $377.83 Add to Cart
Exhaust Manifold - Forced Performance Exhaust Manifold Stud and Nut Kit (DSM/Evo 8/9) Exhaust Manifold stud & nut kit for 6 bolt or 7 bolt DSM. Also available for Evolution Lancer, just select the 7 bolt version. OEM quality studs and copper plated locknuts. MSRP: Was: Now: $30.00 Choose Options
Cover - STM Cam Position Cover (EVO 8/9) The STM Evo 9 MIVEC Intake & Exhaust Cam Position Covers fit all the Evolution IX models and is an easy, bolt-on solution to clean up your engine bay - Because every detail counts! STM MIVEC Covers are available as the pair or individually. The exhaust... MSRP: Was: Now: $30.00 Choose Options
Vibrant MAF Sensor Adapter Plate (DSM/EVO) Vibrant MAF Sensor Adapter Plate for Mitsubishi applications use w/ 4.5in Inlet I.D. filters only MSRP: Was: Now: $29.99 Add to Cart
Whiteline Front Sway Bar Links (Evo 8/9/X) The Whiteline Front Sway Bar Links for Evo 4/5/6/7/8/9/X utilize a high tensile spring steel link fitted with ultra low compliance polyurethane bushes. Critical hardware is replaced with high tensile components to match the higher loads. The result is... MSRP: Was: Now: $165.88 Add to Cart
ETS Standard Tank Front Mount Intercooler (Evo 8) This ETS Front Mount Intercooler bolts on within minutes, and fills the entire grill with the FMIC core for a killer look, and maximum efficiency! This 24" intercooler core retains the factory crash bar and splash pans with the 3" and 3.5" Intercooler... MSRP: Was: Now: $759.00 Choose Options
Exedy Wave Lock Retaining Kit (Evo 8/9) Wave Lock Retaining Clip for Evo Exedy Clutch Kits. MSRP: Was: Now: $30.17 Add to Cart
Universal Catch Can These universal catch cans are manufactured from aluminum and include a mounting bracket, clamp-on and breather element, and drain plug. They are available with two 3/8 in. NPT welded-in bungs.Universal baffled Aluminum oil catch can (3" x 11.5")... MSRP: Was: Now: $99.00 Choose Options
Spark Plugs - NGK (DSM/Evo 8/9) The best plugs for imports running any type of forced induction have always been NGK Copper Spark Plugs. The BPR7ES spark plugs are the stock replacements and are also the stock heat range. The BPR8ES plugs are one step colder. The BPR9ES plugs are two... MSRP: Was: Now: $19.99 Choose Options
Injectors - PTE 1200cc Injectors - Low Z (DSM/Evo 8/9) Upgrading fuel injectors may be a necessity when changing turbochargers, exhaust headers, throttle bodies, fuel systems, or cylinder heads. It's important to insist on the best. PRECISION TURBO brand fuel injectors are individually hand selected, flow... MSRP: Was: Now: $334.00 Add to Cart
Hallman Pro RX Manual Boost Controller This Hallman Pro RX MBC kit was specifically designed for those that only wish to add a few pounds of boost over stock and have a great amount of control over those few pounds. The kit includes a ceramic ball instead of the 316 stainless ball that comes... MSRP: Was: Now: $130.50 Choose Options
ACT Clutch Alignment Tool ACT's Clutch Alignment Tool facilitates the installation of an ACT pressure plate by correctly aligning the clutch disc with the pilot bearing. This results in easy alignment with the transmission input shaft. #AT03 MSRP: Was: Now: $5.00 Add to Cart
OEM Mitsubishi Bare 4G63 Block (Evo 9) OEM Mitsubishi Bare Block for the Evo 9##1050A060*This is a bare engine block with no internals. Purchase includes the bare block with two dowel bushings as pictured. MSRP: Was: Now: $2,561.56 Add to Cart
OEM Mitsubishi Throttle Body Gasket (Evo 8/9) Mitsubishi OEM Throttle Body Gasket - EVO 8/9MD180361 MSRP: Was: Now: $4.00 Add to Cart
AEM Boost Control Solenoid AEM Boost Control Solenoids are pressure-tested to an amazing 100 psi and will not leak. AEM Electronics boost control solenoid kits include -4 AN fittings so that you can securely attach wastegate lines without worrying about leaking at the connection... MSRP: Was: Now: $112.95 Add to Cart
OEM Mitsubishi Intake Manifold Gasket (Evo 8/9) Mitsubishi Genuine OEM Mitsubishi EVO 8/9 Intake Manifold Gasket.Please select application from the pull-down. MSRP: Was: Now: $19.75 Add to Cart
Boostin Performance - Trucker Mesh Fitted Hat Boostin Performance Trucker Style Fitted Hat with Mesh Back. Company Logo embroidered on left side of bill. S / M - 6 7/8 - 7 3/8L / XL - 7 3/8 - 8 MSRP: Was: Now: $30.00 Choose Options
ARP 4G63 Balancer Bolt & Washer (DSM/Evo 1-9) ARP 4G63 Balancer Bolt & Washer (DSM/Evo 1-9)#207-2501Includes-bolt-washer-assembly lube. The OEM bolt and washer weigh 6.67 ounces and the ARP bolt and washer weigh only 5.79 ounces. MSRP: Was: Now: $38.80 Add to Cart
Kiggly High Pressure Beehive Valve Spring Set (DSM/Evo) High Pressure Beehive Valvesprings 4G63 with Titanium Retainers & Steel Seats •The Original Beehive Spring Kit brought to the 4G63 Platform in 2006.•Fits all 4G63 engines including DSM and EVO.•Compatible with all popular cam... MSRP: Was: Now: $459.00 Add to Cart
Whiteline Front Sway Bar Mount Bushing Kit (Evo 8/9) One of the most common suspension service items as they are easily inspected and simple to replace. Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease... MSRP: Was: Now: $25.88 Add to Cart
Aeromotive Belt Drive Pump EFI Regulator Aeromotive Belt Drive Pump EFI RegulatorUltra-High Flow EFI Regulator, adjustable from 40-100 PSI. Engineered for our Belt-Drive and Hex-Drive Fuel Pumps, the Belt Drive EFI Regulator is suitable for engines making up to 4,000 HP on gasoline and is... MSRP: Was: Now: $379.95 Add to Cart
JMF V-Band Cast Merge Collector (DSM/EVO 8/9/X) If you're a DIY manifold builder this collector is a must have! This is JMF's investment cast turbo merge collector for the PTE and TIAL V-band turbos. Made from 304 stainless steel, designed to work with 1.5" schedule 10 or 40 nominal pipe... MSRP: Was: Now: $140.78 Add to Cart
AEM X-Series GPS Speedo Gauge 0-160 MPH Display ground speed, course and altitude via an included 10Hz GPS receiver. Integrates with Infinity ECU, Series 2 EMS or EMS-4 to add track mapping, and an included Vehicle Speed signal can be outputted to an existing speedometer to eliminate the need... MSRP: Was: Now: $163.95 Add to Cart
OEM Mitsubishi Turbo to Manifold Gasket (EVO 8/9/X) OEM Mitsubishi Turbo to Manifold Gasket for Evo 8/9 & X!#1515A184 MSRP: Was: Now: $75.95 Add to Cart