Evo X & RalliArt
2116 Stonington Ave, Hoffman Estates, IL 60169
Let's Stay In Touch
Evo X & RalliArt
Drivetrain & Clutches
Driveshaft - Driveshaft Shop Aluminum Driveshaft (2G DSM AWD)
These are Driveshaft Shop's aluminum drive shafts for the Eclipse and Talon. This shaft is designed to replace the first 2 shafts of the factory 3-piece system. They are made from 6061-T6 aluminum and 3" or 3.5" in diameter, it also includes a custom 7075-T6 aluminum plate to convert the CV back to a u-joint style end and bolt to the factory rear shaft section. The first 2 pieces of the stock shaft is 22lbs and our single is only 12lbs. The aluminum shaft is also more torsional than the shorter steel shaft and will help save the rest of the drivetrain from the harmful shock factor of launching the vehicle at the track. They were going to try to make a single shaft but due to Critical speed limitations it would need to be 4" in diameter and would not fit under the car and also the operating angles would not allow for a 1-piece shaft to work. The front angle was 2 degrees and the back was 7 degrees (not good), the problem is the rear joint would move more than 2 times as much as the front and cause a very nasty vibration. The AE-7 manual of Automotive engineers doesn't recommend any driveshaft to have more than a 1 degree difference from one operating angle to the other (this would be a 5 degree spread). Some of the carbon fiber shaft company makes this shaft but the angle problem still remains and in our opinion will cause the fiber to tear over time and fail. They come complete with a conversion plate for the CV end and all hardware to make this a job that can be done in the garage.
The 3" shaft is rated for 650HP
The 3.5" shaft is rated for 950HP
Please use the pulldown to make a selection.
Usually Ships in 2 to 3 Business Days
3.5" [Add $50.00]
These are Driveshaft Shop's aluminum drive shafts for the 2G DSM. This shaft is designed to replace the first 2 shafts of the factory 3-piece system.
Flywheel - ACT Streetlite (DSM)
Clutch - OEM DSM Throw Out Bearing (DSM)
Clutch Line - STM Stainless Steel Master to Slave Line (DSM)
Clutch Kit - Competition Clutch Stage 2 Street Series 2100 (DSM)
**Boostin Performance 300M Transmission Output Shaft** (DSM)
Cover - Magnus Billet Transfer Case Cover (DSM)
Kiggly - Billet Differential Support Saddle (DSM)
Kiggly - 5-Friction Front Clutch Pack for OEM Basket (DSM)
Share your knowledge of this product.
Be the first to write a review »
Get on the list
& get exclusive deals
Enter your email address for special offers from Neon
, Boostin Performance, Inc.. All Rights Reserved.